Three_Waggle

Hey Guys, so at the beginning of this winter, I hadn't gotten my clubs out of my trunk fast enough and my new-"er" Mizuno MP-60s got some- not a LOT- but some noticeable tiny rust specs on the shafts, anyone got a good way to buff em out!?

Thanks!

Surtees

some auto crome Polishers are pretty good. I'll have to have a look at the one i've got a home to see what brand it is.

__________________
That sounds like something a "Super Hero" would say; "I Have The Power" lets put you in tights and a cape!

Topflite_d2

Buy new Project X shafts. haha JK
I used 0000 steel wool and it didn't seem to scratch them too much if you go lightly, and like surtees said crome polishers work good too.

__________________
I play in a regular foursome.
I'm a single looking for a game.
I race the sun to get in 18 and I've putted for hours in near darkness.
I belong to a club.
I play the munis.
Sometimes the game is metal and sometimes it's a match.
I grind for two bucks like it was a thousand.
I still feel my dad's hands teaching me to hold a club and I'll never forget the day I beat him. I AM A GOLFER.
See golf doesn't begin on the 1st tee and doesn't end on the 18th green... its a life long journey.

300Yards

That happened to me last year. All I did was clean the areas with some Easy off, and scraped the rust off with a steel wire brush. Then I polished the shaft to get any scrathces out. Good as new now.

Powerfade

I simply used an SOS pad. Good and soapy, rub gently and rust all gone. No scratches either.

__________________
-Bob

“The older I get the better I used to be!”
--Lee Trevino

Three_Waggle

Just got done trying a mixture of the methods, used a Brilo Pad type material to rub the small rust spots off and then used a No7 Chrome & Metal Polish on them right afterwards. They look Great! thanks for the tips.

EDIT: BTW, not gonna replace the shafts, had that done when I had them fitted for me. threw on some Project-X Rifled Shafts. (Rifle Project X Iron Shafts 3-PW)

Topflite_d2

Oh nice. The irons I'm getting have the non-flighted Project X 5.5's on them I've herd they are smooth.

__________________
I play in a regular foursome.
I'm a single looking for a game.
I race the sun to get in 18 and I've putted for hours in near darkness.
I belong to a club.
I play the munis.
Sometimes the game is metal and sometimes it's a match.
I grind for two bucks like it was a thousand.
I still feel my dad's hands teaching me to hold a club and I'll never forget the day I beat him. I AM A GOLFER.
See golf doesn't begin on the 1st tee and doesn't end on the 18th green... its a life long journey.

Three_Waggle

Project X's Rifled shafts are really nice... I would recommend the Rifled Spinner shafts for your PW-SW-LW if you have a decent club and they are worth the $... I use a Golden Bear SW cuz I tend to hate that club the most and use it to practice my Club Throw (Throwing Your Club by Top 100 Teacher Charlie King | Homepage | Golf.com) LoL. Enjoy your new shafts.

Topflite_d2

Thanks thats good to hear. I haven't herd anybad things about the Project X's. I have a Cleveland CG10 SW so I could get those. I totally know what you mean about throwing clubs I've been known to do that. I even threw my SW once and bent the shaft when it hit a tree branch. Hopefully the lessons will help keep me in check.

__________________
I play in a regular foursome.
I'm a single looking for a game.
I race the sun to get in 18 and I've putted for hours in near darkness.
I belong to a club.
I play the munis.
Sometimes the game is metal and sometimes it's a match.
I grind for two bucks like it was a thousand.
I still feel my dad's hands teaching me to hold a club and I'll never forget the day I beat him. I AM A GOLFER.
See golf doesn't begin on the 1st tee and doesn't end on the 18th green... its a life long journey.

300Yards

I have flighted 5.5s in my CCI Forged irons. I love them!